thepro insulating sealing element
The product
Thepro InsulationSealElements consist of a large-format XPS insulation board with a wolfseal fresh concrete bond sealing membrane laminated on one side, which can be installed under floor slabs and on external walls.
The elements serve as backflow-proof thermal insulation and, in conjunction with white tubs, as crack-bridging external waterproofing against pressing and non-pressing water.
Thepro insulating sealing elements in the format 2.40 m x 2.75 m with the required compressive strength are produced for installation under the floor slab.
For installation on walls, thepro insulating sealing elements are produced with a width of 2.40 m and an individual height of up to 5 m.
Approved for use against pressing and non-pressing water in conjunction with a white tank in accordance with the WU guideline
The field of application
For waterproofing structures for the load case of pressing water in conjunction with a white tank and in accordance with DIN 18533 for the load case of ground moisture, including backflow-proof perimeter insulation.
The processing
The thepro insulating sealing element is installed in the wall formwork. Recesses and penetrations are simply cut out on site. With the FBV system, the thepro DDE is connected to the concrete wall monolithically and securely. The thepro DDE can be inserted against the shoring with single-sided formwork or into the formwork with double-sided formwork.
The processing guidelines must be observed.
Delivery size
Width: 2.40 m
Height: up to max. 5.0 m
Insulation thicknesses: 80 – 200 mm
The better seal
Full-surface, crack-bridging external waterproofing
Bond between the waterproofing and the concrete: no trailing of the waterproofing in the event of damage
Quick and easy processing of the elements with hot air or flame
The better thermal insulation
No thermal bridges at pump sump, floor slab, wall/floor connection, window and light well
Full-surface and backflow-proof bond between waterproofing and insulation
Quick installation thanks to large-format elements
Available in all standard insulation thicknesses and compressive strengths
Approvals
Approvals
Product data sheet
Tender texts
Assembly instructions
Accessories
thepro wall thickness
Water-impermeable wall thickness with wolfseal special composite coating on the outside.
thepro impact sealing tape
For professional sealing of horizontal and vertical joints.
thepro impact sealing tape individual
For professional sealing of joints at internal corners.
thepro connecting tape
For professional sealing of equipotential bonding.
thepro bulkhead U-profile
U-profile for professional installation of thepro elements on the cleanliness layer.
thepro bulkhead mounting bar
Mounting rod incl. insulation dowel and screw for fastening thepro elements to the shoring.
thepro bulkhead spacer
Spacer for single-sided shuttering against thepro bulkhead wall to maintain the planned wall thickness when filling the cavity for shoring. Bar valley with enlarged support surface on the outside - plastic cap on the inside.
Do you have a question or would you like to order?
We are just a phone call or e-mail away and look forward to hearing from you.
